How can I save electricity: simple recommendations that always work
Every month each of us comes to mind how to save electricity.
After all, such an output article is one of the most basic in the budget of the average family.The tariffs for residential and community services grow from year to year, so this question is very relevant.
Proper use of lighting products
Where can you save?Experts recommend replacing standard switches for dimmers.You can set the light level with such devices.
After all, only a few people need a constant source of light light in the kitchen, in the bedroom, in the toilet or in the bathroom.As a rule, there is a fairly small force.
This applies in particular to situations if you only go into the room for a minute, watch a film or play computer games.
You can continue to save by simply replacing ordinary light bulbs with LEDs.They contribute to a much less energy consumption.
As far as the energy storage lamps are concerned, despite the fact that they also contribute to reducing electricity costs, not all experts recommend them.
The fact is that manufacturers use mercury in their production.
In addition, such lamps give an unnatural light, which may not affect the eyesight in the best way and significantly reduces the sharpness.In addition, your lifespan is not as reliable as the LED.
Despite the fact that the latter are quite high, they will quickly pay off.With them you can save the payment.
For example, a 4 -W lamp 16 -is more economical than a standard lamp of 75 watts.And it will give Sveta exactly the same amount.
Therefore, it is better to spend money on the LED lamp than pay more.
In addition, your validity period according to your manufacturing companies is approximately 30,000 hours.At the average time of the work process, 4 hours a day, such a lighting part is sufficient for more than ten years!
They are also safer than ordinary fire because they almost don't warm up.Consider your acquisition as long -term investments and investments and you will pay more than paying off.
You can save electricity by increasing the number of light sources by the entire circumference of the apartment.
In this case, it is easy to regulate the required lighting.For example, it is not necessary to switch on the light throughout the bedroom or in the kitchen if you have to illuminate the table.
It is sufficient to switch on the wall lights or a desktop lamp.
How do I use the technology correctly?
The correct selection of devices and electrical appliances helps to significantly minimize the light costs:
- Remember that you should select a technology with a "class of energy consumption" in shops.This letter means that iron, refrigerator, microwave etc. consume a small amount of electricity.The "B" class is also not inferior to him.A big mistake will be the purchase of devices with the "G" class because it is the most energy -rich.
- The size of the equipment should be selected depending on how many family members live in the apartment.For example, if the family consists of two people, you do not buy a washing machine with a 5 kg load.In addition, in this case you have to spend additional kilowatts of electricity and start half a unit.This also applies to the purchase of a powerful refrigerator that is not required in a family of two people.
Disconnect the electrical devices completely if you do not use them for some time.Remember that a fork should always be switched off from a socket according to the device!This is due to the fact that the household appliances also consume electricity in standby mode.Provide the same manipulations with chargers for phones, laptops and other devices.
Proper use of the refrigerator to get rid of unnecessary expenses
When choosing a refrigerator in the shop, you prefer what has no frost function.A technology with a similar brand significantly reduces power consumption.
It is best to place the refrigerator in the coldest place in the kitchen.The installation of such a device element near the stove is wrong.It is recommended to put it on the outside of the room.
It is always bigger than others.As a result, the refrigerator cannot overheat.
As for the freezer, it is best to keep it with products.This supports the specified temperature of the electrical engineering normally.
Also ensure that the door of the freezer and the fridge is always in a closed state.
You don't have to put hot drinks, soups and other liquids on the shelves of the refrigerator.Let the food cool on plates, pots or in a pan by yourself.It is free and you do not have to spend power and be spent in addition to kilowatts.It should be remembered that milk, juices, soups and other liquids should always be closed.Otherwise, the moisture evaporates, which causes energy consumption.
The kitchen plate helps to save
When buying an apartment, buy the one that is equipped with a gas stove.The preparation of food is much more profitable than on the one who works for electricity.
You can also reduce the payment by using an induction furnace.
It has the smallest energy consumption because this household appliance only heats the bottom of the pan, boiler or pot.And the burner warms up in ordinary tiles.
Also remember that the diameter of the dishes for the preparation of different dishes should be a little more than the burner or with it.
In this way, you can get better heat transfer, since a closer to the burner is suitable.Cooking with a closed lid helps not to turn electricity.
This method heats food in dishes, not in the kitchen.
Always switch off the stove 5 minutes before the court was prepared.Cook at high temperature for initial warming and then reduce it.
The court reaches the willingness and without the use of additional energy costs.
It is desirable to bring water to the gas to a boil, as a kettle that works out of the network consumes a lot.In addition, it is involved in a very high performance when working.
We wash, iron and save
When choosing a washing mode, keep in mind that most powder contains special components on their basis and extinguish underwear at low temperatures.
Therefore, it is not necessary to set it at most.The same rule applies to large revolutions.Also, do not start a half -empty washing machine.It is better to save linen until they are completely loaded.
Residual heat can be used when ironing.To do this, switch off the iron 10 minutes before the end of this procedure.The device is hot all the time.
Place the food film on the ironing board.This will not output electricity for heating its surface.
Other effective methods
The following recommendations will help to minimize the costs:
- When decorating rooms (selection of furniture, wallpaper, floors, painting ceilings and walls), light tones prefer.The more color the color is lighter, the more the light is reflected.In order to obtain a normal lighting level, less electricity is also required.
- The next recommendation will be banal, but with your help you can also significantly reduce the costs for receipts.To save electricity, you have to wash the windows more often (depending on the degree of your pollution).The fact is that dirty glass always fits almost half of the sun and natural light.As a result, it is necessary to configure dimmers with high performance.The light bulbs must also be fliped out of dust at least twice a month.In this case, everything depends on the degree of pollution.
- If you buy living space, you should be lightest.This means that no additional lighting is required during the day.
- Before you turn on the shared systems or air conditioning systems, you must make sure that there are no designs at home.Otherwise, such a technology heats the road, not the rooms.Choose air conditioning systems based on the size of the room.This will pay the light much less.To switch on the heating as little as possible, you can put windows made of plastic.Despite the fact that this pleasure is not cheap, it pays off completely over the years.
A outdated television or computer monitor is best changed for newer (LEDs, etc.).There is great energy consumption in the technology of the old style.
Modern technology consumes very little electrical energy.Do not switch on the scanner either, the printer is unnecessary.